Audio Control

Tone Setup

You can set a Tone curve.

1Display the Tone screen

See <Equalizer Control> (page 87).

2Set the Tone

1

25

36

47

89

1Tone curve becomes flat.

2Bass adjustment items are displayed.

3 Middle adjustment items are displayed.

4 Treble adjustment items are displayed.

5 Sets the Center frequency.

6 Sets the level.

7 Sets the Q factor. (Only Bass and Middle can be set)

8 Bass DC Extend settings. (Only when Bass is selected)

If turned "On", it extends the bass center frequency to the low register by approximately 20%.

9 Returns to the "Equalizer" screen.

Zone Control

You can set the front and rear audio source.

1Display Zone Control

Touch in the "Audio Control Menu" screen (page 86).

1

2

1Displays the current source.

2Returns to the "Audio Control Menu" screen.

2Set the Zone Control

3

 

4

5

5

6

7

3Turns the Zone Function (that sets different source sounds for front and rear speakers) On or Off.

4Switches the front and rear audio sources. (This button appears when the Zone function is On.)

Use "Reverse" to change over the front and rear audio sources.

5Sets the front and rear audio source separately.

(This button appears when the Zone function is On.)

⁄

•When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source.

6Adjusts the volume of the rear channel. (This button appears when the Zone function is On.)

7Returns to the "Audio Control Menu" screen.

88DNX7120/DDX712/DDX7032