Kenwood DPF-1030, DPF-2030

Operation of remote control unit (DPF-2030 only)

1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.

2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.

3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor.

In such a case, change the system installation position to prevent the malfunction.

Loading batteries

The keys with the same name as those on the main unit operate the same way as the main unit.

The keys marked * are provided only on the remote control unit.

5Numeric keys ( 11

1 ~ ))

))

) , 00

0 )#

6Basic function keys

Skip keys (4,¢)#

Search keys (1,¡)#

Stop key (7)@

Play/Pause key (6)@

1TIME DISPLAY key #

2Program-related keys

P.MODE key $

EDIT key *

CLEAR key %(

CHECK key %(

3RANDOM key )

4REPEAT key ^

Model: RC-P0715

Infrared ray system

÷When pressing more than one remote control key successively,

press the keys securely by leaving an interval of 1 second or more

between keys.

After plugging in the power cord, press the POWER switch

of the main unit to turn the unit ON. When the unit is turned

ON, press the key of the function to be operated.

1 Remove the cover. 2 Insert batteries. 3 Close the cover.

÷Insert two AA-size (R6) batteries as

indicated by the polarity marking.

Operation

Operating range

(Approx.)

Remote control

light sensor

Notes

*7OUTPUT (DOWN, UP) key 7

30º

TIME DISP

123

P.MODE

456

EDIT

789

CLEAR

RANDOM

REPEAT

OUTPUT LEVEL

DOWN UP

CHECK

0 +10

4¡1¢

REMOTE CONTROL UNIT RC-P0715