System connections

Connection to digital amplifier or MD

7

Connect the DIGITAL OUT (OPTICAL) jack to the digital input jack

 

of the amplifier, DAT recorder, MD recorder, etc., using an optical

 

fiber cable which is commercially available in audio stores.

Optical fiber cable

÷When using an optical fiber cable to connect this unit to a digital amplifier, insert the plug straight into the jack until a snap sound is heard.

÷Be careful not to bend, coil, or bundle the optical fiber cable.

÷Optical fiber cables available on the market may not always be able to be used with this player. If your cord cannot be used with this unit, consult the store from which you purchased the cord or your nearest dealer.

Connection to a general-use amplifier

Use the provided audio cords to connect the OUTPUT jacks of this unit to the CD input jacks (or AUX jacks) of the amplifier.

System control connections

Connecting system control cords after connecting a KENWOOD audio component system lets you take advantage of convenient system control operations.

SYSTEM

CONTROL

This unit is compatible only with the [SL16] mode. The system control operation is not available if the unit is connected in the [XS8] connection mode.

If your component has the mode select switch, set the connected components to the [SL16] mode.

SYSTEM

CONTROL

SYSTEM

CONTROL

÷You can connect the system control cord to either system control jack of the unit.

÷Do this operation after completing all connections. (Ensure that the power plug is not connected.)

Amplifier or receiver

This unit

Cassette deck or MD

1. If your amplifier or receiver does not have a system control

Notes terminal, do not connect any system control cords to the system control terminals on the other components.

2. Do not connect system control cords to any components other than those specified by KENWOOD. It may cause a malfunction and damage your unit.

3.Be sure the system control plugs are inserted all the way in to the system control terminals.

System control operations

Remote Control

Lets you operate this unit with the system remote control unit supplied with the amplifier or receiver.

Automatic Operation

Automatically switches the input selector on the amplifier or receiver when you start playback from this unit.

Synchronized Recording

Lets you synchronize recording with the start of playback when recording from a CD. Also, the simple CCRS operation enables great recordings from CDs.

See the operating instructions supplied with your cassette deck for details.