Manuals / Brands / Home Audio / CD Player / Kenwood / Home Audio / CD Player

Kenwood DPF-J5010, CD-224M Important items, NO DISC, Cleaning, Periodic inspection, Caution on condensation, Memory backup function, Note related to transportation and movement

1 32

Download 32 pages, 880.38 Kb

Important items

30

Cleaning

Do not use volatile solvents such as alcohol, paint thinner, gasoline, or benzine, etc. to clean the cabinet. Use a clean dry cloth.

Do not use contact cleaners because it could cause a malfunction. Be specially careful against contact cleaners containing oil, for they may deform the plastic components.

CD-224M/DPF-J5010 (En)

Periodic inspection

This unit incorporates an optical pickup which is a precision device. It is recommended to have this unit inspected periodically to clear the pickup after about 1000 hours of use, although this period may vary depending on the installation condition (temperature, humidity, dust, smoke, etc.) of the unit.

The unit has inspected, please consult your dealer or a KENWOOD service center in your area.

Caution on condensation

Condensation (of dew) may occur inside the unit when there is a great difference in temperature between this unit and the outside. This unit may not function properly if condensation occurs. In this case, leave the unit for a few hours with the power left ON, and restart the operation after the condensation has dried up.

Be specially cautious against condensation in a following cir- cumstance:

When this unit is carried from a place to another across a large difference in temperature, when the humidity in the room where this unit is installed increases, etc.

Memory backup function

Stored contents for at least	Power status (ON or OFF),
3 weeks after power plug is	Title name registration contents
unplugged from the AC out-	Music type registration contents
let.	Best selection registration contents

Note related to transportation and movement

Before transporting or moving this unit, carry out the following op- eration:

1.Remove all discs from the carousel and close the door panel.

2.Confirm that the flashing “NO DISC” display has changed to steady lighting, and then switch off the power.

NO DISC

3. Wait a few seconds, then disconnect the power plug.

Contents

KENWOOD CORPORATION COMPACT DIGITAL AUDIO Introduction 2 Before applying power *AC voltage selection For the United Kingdom Safety precautions Special features CD player with 200-discchanger CD-TEXTsupport Title name registrable Programmed playback Unpacking Accessories Types of discs playable on this unit Disc handling precautions Never play a cracked or warped disc CD accessories System connections Optical connection Connection to digital amplifier or MD Connection to a general-useamplifier SYSTEM CONTROL CONNECTIONS SYSTEM CONTROL OPERATIONS Controls and indicators About the STANDBY mode Operation of remote control unit Loading batteries Operation Preparation 1Switch power ON 2Open the door panel toward the front 3Load discs DISC001 E1:23• DDISCCREADING3 In regard to ALL DATA READ mode ALL DATA READ3 D001:: CDATEXT3 Normal play (TRACK mode) 12 Preparation Playing tracks in order from track No.1 1Select the disc Select the disc TRACK01D120:T02 PGM0101D131:T02 BEST011D104:T03 M.TYPE1DRhythm2 ONE0DISC1RANDOM Skipping tracks Searching Displays Displays scrolling Time display Displaying all the text information To jump to the next track or to return to the previous track during display: Programming tracks in desired order (PGM mode) 1Press so that the PGM indicator lights 2Select the disc 3Select the track number 4Start playback PGM01EDD200DT03 To add a track to the program To change a track in the program Repeated playback (REPEAT mode) To repeat only the desired tracks PGREPEAT2ONDT03 To cancel repeated playback To repeat one selected disc ONE3DISCRRANDOM ALL3DISCRRANDOM To cancel random playback For random music type Assigning Title Names 1Switch to title name input mode 2Select the desired disc TITLEIINPUTNDOM D---CSELECTNDOM DISC READING 3Enter the disc title > ZABC For direct selection of characters 4Store the disc title SONEBODYCT >=ZABC SONEBODYCT >=LMNO 3Execute title change or deletion ZABC To enter a space (MUSIC TYPE mode) 1Activate the music type mode MUSICITYPETNDOM MUSICITYPETSETM SELECTTDISCSETM 3Select the music type RockCMusicTNDOM To quit MUSIC TYPE mode To delete the registered music type D122CTYPEcCLEAR Playing the music type file 2Select the music type 3Start playback M.TYPETMODESOFF Registration of best selection file 1Play the track to be registered 2Register it in the best selection file 3Register other favorite tracks by performing steps 1and 2 for each of them BEST01YD104LT03 BEST SELECTION To quit BEST SELECTION mode To delete the registered best selection BEST02LCLEARN03 Timer operation 1Set the power switches of the system compo- nents to the ON positions 2Select the disc to be played 3Set the listening volume 4Set the timer for the desired ON time Important items Cleaning Periodic inspection Caution on condensation Memory backup function In case of difficulty Operation to reset To reset the registered contents Remote control unit CD Player Specifications For the U.S.A FCC WARNING NOTE: