Kenwood DPF-J7020 DDISCCREADING3, ALL DATA READ3, D001:: CDATEXT3, DDISCCREADING3, In regard to ALL DATA READ mode, Disc replacement, 4Close the door panel, 1 MUSIC TYPE

Preparation

DPF-J7020 (EN)

Disc replacement

Discs can be replaced with the same procedure as “Loading discs in the carousel”. In stopped condition, all discs can be exchanged. However, when the door panel is opened while “DISC DETEC- TION” is being displayed, it may not be possible to remove the disc which had been played. Accordingly, wait for the “DISC DETECTION” indication to go out before opening the door panel. When the disc information has been read in at the time of registration of disc information like title, music type, etc., the disc information can be recalled even when the disc insertion place

is changed.

)£

4Close the door panel.

÷When a title has been registered and the door panel is closed, reading operation is performed automatically.

The display flashes.

DDISCCREADING3

In regard to ALL DATA READ mode

The disc information for all discs will be read. We recommend to execute this mode before playback after discs have been exchanged. Close the door panel before operation.

To display the title on a LCD remote control unit (provided with a KENWOOD Receiver or optional), perform the all data read operation first, and operate the LCD remote control unit with the door left closed. For the operation of the LCD remote control unit, refer to the instruction manual of the Receiver or LCD remote control unit.

1Press the MODE key.

MODE

2Select “ALL DATA READ”.

Each press switches the modes as follows: 1 MUSIC TYPE2DISC SEARCH3 TITLE INPUT4 ALL DATA READ5 ALL INFORMATION

DISC SKIP

DOWN UP

3Set the input.

SET

ALL DATA READ3

Search in progress or	The display flashes.
reading information

DDISCCREADING3

When the disc is CD-TEXT

D001:: CDATEXT3

÷Repeat the above procedure so that the complete disc information is read into the CD player.

÷In the case of a non-CD-TEXT disc, the “D001:NO CD TEXT” display will appear for approx. 3 seconds.

To quit ALL DATA READ modePress the 7 key.

1. Please remove all CDs from the carousel before moving the unit.

Notes 2. If blinking “PLEASE WAIT” is displayed when the door panel is opened, do not attempt to change the disc.