System connections

DPF-J7020 (EN)

Connection to digital amplifier or MD

7

Connect the DIGITAL OUT (OPTICAL or COAXIAL) jack to the digital input jack of the amplifier, DAT recorder, MD recorder, etc., using

an optical fiber cable or coaxial cable which are commercially avail-Optical fiber cable able in audio stores.

÷When using an optical fiber cable to connect this unit to a digital amplifier, insert the plug straight into the jack until a snap sound is heard.

÷Be careful not to bend, coil, or bundle the optical fiber cable.

÷Optical fiber cables available on the market may not always be able to be used with this player. If your cord cannot be used with this unit, consult the store from which you purchased the cord or your nearest dealer.

Connection to a general-use amplifier

Use the provided audio cords to connect the OUTPUT jacks of this unit to the CD input jacks (or AUX jacks) of the amplifier.

SYSTEM CONTROL CONNECTIONS

Connecting system control cords after connecting a KENWOOD audio component system lets you take advantage of convenient system control operations.

There are two KENWOOD system control modes. Make connections according to the groups of terminal symbols shown below.

[XS8] Mode

:

lets you combine F, f, and ƒterminals

[SL16]Mode

:

for

terminals only

This unit is compatible with both [XS8] and [SL16] modes. Select the mode according to the connected components.

6

SL16 XS 8

j

Amplifier or receiver

SYSTEM

CONTROL

This unit

SYSTEM

CONTROL

Cassette deck or MD

SYSTEM

CONTROL

÷Do this operation after completing all connections. (Ensure that the power plug is not connected.)

1.If your amplifier or receiver does not have a system control

terminal, do not connect any system control cords to the

Notes system control terminals on the other components.

2. Do not connect system control cords to any components other than those specified by KENWOOD. It may cause a malfunction and damage your unit.

3.Be sure the system control plugs are inserted all the way in to the system control terminals.

SYSTEM CONTROL OPERATIONSRemote Control

Lets you operate this unit with the system remote control unit supplied with the amplifier or receiver.

Automatic Operation (Except [XR] equipment)

Automatically switches the input selector on the amplifier or receiver when you start playback from this unit.

Synchronized Recording (Except [XR] equipment)

Lets you synchronize recording with the start of playback when recording from a CD. Also, the simple CCRS operation enables great recordings from CDs.

See the operating instructions supplied with your cassette deck for details.