Disc replacement

Discs can be replaced with the same procedure as “Loading discs in the carousel”. In stopped condition, all discs can be exchanged. However, when the door panel is opened while “DISC DETEC- TION” is being displayed, it may not be possible to remove the disc which had been played. Accordingly, wait for the “DISC DETECTION” indication to go out before opening the door panel. When the disc information has been read in at the time of registration of disc information like title name, music type, etc., the disc information can be recalled even when the disc insertion

place is changed.

)¢

Preparation

CD-2280M/DPF-J9010 (En)

11

: Keys and controls used in the operations described on this page.

Selecting Mechanism A or B

The audio played on Mechanism-A is output from OUTPUT-A and that played on Mechanism-B is output from OUTPUT-B. This makes it possible to enjoy different music in different rooms.

B A

OPERATION

÷Each press of the key switches mechanisms A and B alternately and lights the indicators accordingly.

÷After selecting the mechanism, operate the player.

÷The OPERATION A-Bkey is set to A during continuous play mode. It is not possible to switch the mechanism during it.

In regard to ALL DATA READ mode (Mechanism-A only)

The disc information for all discs will be read. It is convenient to execute this mode before playback after discs have been exchanged. Close the door panel before operation.

To display the title name on a LCD remote control unit (provided with a KENWOOD Receiver), perform the all data read operation first, and operate the LCD remote control unit with the door left closed. For the operation of the LCD remote control unit, refer to the instruction manual provided with your receiver.

1Press the MODE key.

MODE

2Select “ALL DATA READ”.

￿DISC SKIP 5

3Set the input.

SET

Each press switches the modes as follows:

1 MUSIC TYPE

2TITLE INPUT

3ALL DATA READ

4 ALL INFORMATION

5 DTS ANALOG MUTE

DISPLAY-A

ALL DATA READ3

Search in progress or

The display flashes.

reading information

DDISCCREADING3

When the disc is CD-TEXT

D001:: CDATEXT3

÷Repeat the above procedure so that the complete disc information is read into the CD player.

÷In the case of a non-CD-TEXT disc, the “D001:NO CD TEXT” display will appear for approx. 3 seconds.

÷This operation is not available during the continuous play mode.

 

To quit ALL DATA READ mode

 

Press the 7 key.

 

 

 

1. Please remove all CDs from the carousel before moving the unit.

Notes

2. If blinking “PLEASE WAIT“ is displayed when the door panel is opened, do not attempt to change the disc.