Kenwood CD-2280M, DPF-J9010 Assigning Title Names, 1Switch to title name input mode, 2Enter the title names, To enter the disc title, For direct selection of characters

Registration of Title Name

For discs not corresponding to CD-TEXT, a title name can be given to the disc (max. 25 characters). Up to 20 tracks

20 titles can be registered per disc. Operation is possible also when the door panel is open. It is convenient to register titles while discs are being inserted.

Preparation	÷Load discs into the carousel.	0
	÷Check that the Mechanism-A is in the normal
	play TRACK mode.	#
	÷Set the Mechanism-A to stop mode.

Assigning Title Names

1Switch to title name input mode.

1Press the MODE key.

MODE

2Select “TITLE INPUT”.

￿ DISC SKIP 5

SET

\

2Enter the title names.

To enter the disc title

1Select the disc number.

￿DISC SKIP 5

SET

Previous disc Next disc \

2Select a character.

CHARACTER/SEARCH

4 ¢￿

DOWN UP

Press until the character to be entered comes to the position of the flashing cursor.

3Press the SET key.

SET

4Store the disc title.

ENTER

Registration of Title Name

CD-2280M/DPF-J9010 (En)

: Keys and controls used in the operations described on this page.

÷When the MODE key is pressed during title name input mode, the input mode is cancelled.

DISPLAY-A : The display flashes.

TITLEIINPUTNDOM

D--- T-- SELECT

÷To enter track titles without assigning the disc title, go to “To enter the

track title“. ¡

÷The disc number can be selected directly by using the numeric keys in place of the DISC SKIP keys.

÷During playback, the disc only being played can be selected.

÷The characters also can be selected with the DISC SKIP knob on the main unit (provided that the OPERATION-Aindicator is lit). Turn the knob until the character to be entered comes to the position of the flashing cursor.

>=ZABC

Flashing cursor

For direct selection of characters

Each press switches the modes as

Example follows:

ABC	When capital letters have been selected
2	: A→B→C→A .....
	When small letters have been selected
	: a→b→c→a .....
	When numbers/symbols have been selected
	: 2
	To change the character type...	£

÷When the SET key is pressed, one character is set and the cursor goes to the next digit.

÷Repeat this to enter the title name.

÷One character is set and the cursor goes to the next digit.

÷Input the entire disc title by repeating 2 and 3 for each character.

TITLEISTORE!!OM

÷To register the disc names of another disc, repeat the entire procedure of "To enter the disc title".

÷To register another track titles in the same disc, go to step 1-2 in “To

enter the track title“. ¡