18

Disc replacement

Discs can be replaced with the same procedure as “Loading discs in the carousel”. In stopped condition, all discs can be exchanged. However, when the disc door is opened while “DISC DETEC- TION” is being displayed, it may not be possible to remove the disc which had been played. Accordingly, wait for the “DISC DETECTION” indication to go out before opening the disc door. When the disc information has been read in at the time of registration of disc information like title, music type, etc., the disc information can be recalled even when the disc insertion place

is changed.

⁄

Selecting Player A or B

The audio played on Player A is output from OUTPUT-A and that played on Player B is output from OUTPUT-B. This makes it possible to enjoy different music in different rooms.

Main unit

BA OPERATION

Chapter 3

Preparation

÷Each press of the button switches Players A and B alternately and lights the indicators accordingly.

÷After selecting the Player, operate the player.

÷The OPERATION A-Bbutton is set to A during continuous play mode. It is not possible to switch the Player during it.

÷If a registered DTS disc is selected when the Player B is selected, blinking “DTS DISC!“ is displayed and the DTS disc selection is

cancelled.•

In regard to ALL DATA READ mode (Player A only)

The disc information for all discs will be read. It is convenient to execute this mode before playback after discs have been exchanged. Close the disc door before operation.

1Press the MODE button.

MODE

2Select “ALL DATA READ”.

DISC SKIP

DOWN UP

3Set the input.

SET

To display the title on a LCD remote control unit (provided with a KENWOOD Receiver or optional), perform the all data read operation first, and operate the LCD remote control unit with the door left closed. For the operation of the LCD remote control unit, refer to the instruction manual provided with your receiver or LCD remote control unit.

Each press switches the modes as follows:

1 MUSIC TYPE

2DISC SEARCH

3 TITLE INPUT

4 ALL DATA READ

5 ALL INFORMATION

6 DTS DISC SKIP

DISPLAY-A

ALL DATA READ

Search in progress or

 

reading information

The display flashes.

DISC READING

When the disc is CD-TEXT

D001 : CD TEXT

÷Repeat the above procedure so that the complete disc information is read into the CD player.

÷In the case of a non-CD-TEXT disc, the “D001:NO CD TEXT” display will appear for approx. 3 seconds.

÷This operation is not available during the continuous play mode.

To quit ALL DATA READ mode

Press the 7 button.

1. Please remove all CDs from the carousel before moving the unit.

Notes 2. If blinking “PLEASE WAIT“ is displayed when the disc door is opened, do not attempt to change the disc.