Optical digital cable (Commercially-available)

Connecting to a Receiver or Amplifier

6

Chapter 1

Make connections as shown below.

DIGITAL OUT jack (OPTICAL)

When connecting the related system components, refer

Remove the protective cap before using the DIGITAL

also to the instruction manuals of the related components.

Do not plug in the power lead until all connections are com-

OUT jack.

pleted.

Digital component (MD,DAT, etc.)

DIGITAL

 

OUT

 

 

OPTICAL

 

 

TEXT

 

DIGITAL INPUT (OPTICAL)

Remove the cap

*1

OUTPUT

SYSTEM

SL16

DIGITAL

CONTROL TEXT

OUT

 

 

 

 

L

 

 

OPTICAL

 

 

 

 

TEXT

R

A B

*2

To wall AC

 

outlet

System

Communica-

Optical digital cable

control

tion cable

(Commercially-available)

 

cable

 

 

Audio

Audio

SYSTEM

TEXT

OPTICAL

cable

cable

CONTROL

 

 

CD1

CD2

 

 

 

* 1

OUTPUT A:

Analog output from Player A.

OUTPUT B:

Analog output from Player B.

Receiver or Amplifier, etc.

* 2

Note on the SL-16 TEXT jack

When using a KENWOOD Receiver equipped with the SL-16 TEXT jack, connect it to the Receiver using the communication cable provided with this unit. This makes it possible to display the disc and track titles on the LCD remote control unit (provided with the Receiver).

If your receiver has the SL16/XS8 mode select switch,

Note

set the connected receiver to the [SL16] mode.

 

DTS Disclaimer clause

When playing DTS-encoded CDs, excessive noise will be exhibited from the analog stereo outputs. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo outputs of the CD player is connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Sur- round™ decoder system must be connected to the digital output (S/P DIF, AES/EBU, or TosLink) of the CD player.

1. Connect all cables firmly. If connections are loose, there could be loss of sound or noise produced.

Notes 2. When plugging and unplugging connection cables, be sure to first remove the power cable from the AC outlet. Plugging/unplugging connection cables without removal of the power cable can cause malfunctions or damage to the unit.