Kenwood CD-4900M, DPF-J9030 D001 DTS SET, D001 DTS CANC, 1Activate the dts disc skip mode, 2Select “SET DTS DISC“, 3Select the DTS disc, To quit DTS DISC SKIP mode

Registration of DTS discs

	When playing DTS-encoded discs, excessive noise will be exhibited from the analog stereo outputs. If DTS discs are regis-
28	tered beforehand, the audio signal from the Player B (analog OUTPUT-B) is skipped. Use the following procedure before
	playing the DTS disc.
	Preparation	&
	÷Load DTS discs into the carousel.
	÷Check that the Player A is in the normal play
	TRACK mode.	)

1Activate the dts disc skip mode.

1Press the MODE button.

MODE

2Select “DTS DISC SKIP”.

DISC SKIP
DOWN	UP	SET

\

÷When the MODE button is pressed during DTS DISC SKIP mode, the DTS DISC SKIP mode is cancelled.

Each press switches the modes as follows:

1 MUSIC TYPE

2DISC SEARCH

3 TITLE INPUT

4 ALL DATA READ

5 ALL INFORMATION

6 DTS DISC SKIP

Chapter 3

2Select “SET DTS DISC“.

DISC SKIP

DOWN UP

SET

\

3Select the DTS disc.

Select the disc number.

DISC SKIP

DOWN	UP
	SET
Previous disc	Next disc \

Each press switches the modes as follows:

1 SET DTS DISC

2CANCEL DTS DISC

÷The disc number can be selected directly by using the numeric keys in place of the DISC SKIP (DOWN/UP) buttons.

÷To register another DTS disc, repeat the procedure from step 3.

DISPLAY-A

D001 DTS SET?

To quit DTS DISC SKIP mode

Press the MODE button.

To delete the DTS registration

Use the following procedure before moving or changing a DTS disc, and register the disc again.

1Perform steps 1 of “Registration of DTS discs“.

2Select “CANCEL DTS DISC“.

DISC SKIP		SET	Each press switches the modes as follows:
			1 SET DTS DISC
DOWN	UP
		\
			2 CANCEL DTS DISC
			DISPLAY-A
3Select the DTS disc to be deleted.			D001 DTS CANC.?
DISC SKIP
DOWN	UP
		SET
Previous disc		Next disc \	To quit DTS DISC SKIP mode

Press the MODE button.

When a DTS disc is played, the audio signal is not output at the analog OUTPUT A jacks.

Note