Kenwood DPX-302 To quit the program mode, 4Check the programmed tracks (and replace, add or delete tracks as required), 5Enter it, To check:, To add a track to the program:

4Check the programmed tracks (and replace, add or delete tracks as required).

To check:

To replace a track in the program:

1Select the programmed disc or track to be replaced andpress the SELECT key.2 Select a disc or track to re-SELECTplacethediscortrackselected above (step 3-1and 2).

To add a track to the program:

1Select the display as shownon the right and press the SELECT key.2Perform the same operations

SELECT

as in step 3-1and 2.

To delete a track from the program:

1Select the programmed discor track to be cleared and press the SELECT key.2Select “clear” and press the

SELECT

SELECT key.

5Enter it.

(Playback starts from the first programmed track (program No. 1))

÷Turn the MULTI CONTROL jog dial during program playback to the previous or next programmed track.

÷When the jog dial is rotated a little in the direction of counterclockwise once during playback, the track being played will be played from the beginning.

÷To check (modify, add or delete) the programmed tracks after playback, perform the operations in steps 2 and 4.

Playback of CD 19

XD SERIES (En)

Press the TIME key on the remote control unit to switch the time display.

P 0 1 D 1 T20

÷The programmed tracks are displayed in sequence.

P 1 2	D 3	T40
P 1 2	D 3	T40

÷The blinking item can be replaced.

P - - D - T-- Operation

÷The added track number is added to the end of the existing program.

P 1 2 D 3 T40 P 1 2 c l e a r

To quit the program mode

1Select “CD Program Play”.

MENU SELECT

2Press the MENU key.

MENU Goes off

÷If the key is pressed during playback, normal playback in order of tracks resumes from the current track.

÷The program mode can also be canceled by pressing the 0 key.