12
|
English
General features
Adjustment of Equalizer type at PRO
Adjusting the effect of an Equalizer type selected
in 'Equalizer Control' when 'Equalizer mode' is
1
Refer to 'Equalizer Control' (page 11) to
select the Equalizer type.
2
Select the item for adjustment
Press the [FM+] or [AM–] button.
Each time the button is pressed, the items that
can be adjusted switch as shown below.
3
Adjust the item
Press the [
4
] or [
¢
] button.
Adjustment Item
Adjustment Item
Display
Display
Display
Range
Range
Bass Center Frequency
Bass Center Frequency
"BasF"
60/70/80/100 or 150 Hz
Bass level
"BasLV"
–12 — +12
Bass Q Factor
"BasQ"
1.00/1.25/1.50/2.00
Bass Extend
"EXT"
ON/OFF
Middle Center Frequency
Middle Center Frequency
"MidF"
0.5/1.0/1.5/2.0 kHz
Middle level
"MidLV"
–12 — +12
Middle Q Factor
"MidQ"
1.0/2.0
Treble Center Frequency
Treble Center Frequency
"TreF"
10.0/12.5/15.0/17.5 kHz
Treble level
"TreLV"
–12 — +12
•
According to the Bass Q Factor setting value, the
frequencies that can be set in Bass Center Frequency
change as shown below.
Bass Q Factor
Bass Center Frequency
Bass Center Frequency
Bass Center Frequency
1.00/1.25/1.50
60/70/80/100
2.00
60/70/80/150
•
When the Bass Extend is set to ON, low frequency
response is extended by 20%.
4
Exit the Equalizer Control mode
Press the [EQ] button for at least 1 second.
When operation stops for 10 seconds, the
Equalizer type at that time is registered and the
Equalizer Control mode automatically closes.
Memory preset of adjustment of
Equalizer type
The 'Adjustment of Equalizer type at PRO' can be
preset.
1
Refer to 'Adjustment of Equalizer type at
PRO' (page 12) to adjust the Equalizer type.
2
Preset the adjusted value
Press the [1] — [3] button for at least 1
second.

Recalling a setting value

1
Enter the Equalizer Control mode
Press the [EQ] button.
"EQ PRO" is displayed.
•
If "EQ EASY" is displayed, refer to 'Equalizer mode'
(page 24) to set the mode to "EQ PRO".
2
Recall the setting value
Press the [1] — [3] button.
Movie Select
Selecting the Movie display.
1
Enter the Movie Select mode
Press the [MOVIE] button for at least 1
second.
"Movie" is displayed.
2
Select the Movie
Press the [MOVIE] button.
Each time the button is pressed, the Movie
switch as shown below:
Movie
Display
Display
Display
Scan of Movie
"MovieScn"
Movie 1
"Movie 1"
Movie 2
"Movie 2"
Movie 3
"Movie 3"
Movie 4
"Movie 4"
Movie 5
"Movie 5"
Movie 6
"Movie 6"
Movie 7
"Movie 7"
Movie 8
"Movie 8"
OFF
"MovieOff"