English
|
23
Function Set
Function Set
Setting during operation beep sound etc.
The Function Set basic operation method is
explained here. The reference for the Function
items and their setting content is after this
operation explanation.
1
Enter Function Set mode
Press the [FNC] button for at least 1 second.
"Function" is displayed.
2
Select the Function Set item
Press the [FM+] or [AM–] button.
Example: When you want to set the beep sound
select the "BEEP" display.
3
Set the Function Set item
Press the [
4
] or [
¢
] button.
Example: When "BEEP" is selected, each time the
button is pressed it switches "BEEP On"
or "BEEP Off"
. Select 1 of them as the
setting.
You can continue by returning to step 2 and
setting other items.
4
Exit Function Set mode
Press the [FNC] button.
•
When other items that are applicable to the basic
operation method above are displayed afterwards
their setting content chart is entered. (Normally the
uppermost setting in the chart is the original setting.)
Also, the explanation for items that aren’t applicable
are entered step by step.
���
���
���
�
�
���
���
���