English
Troubleshooting Guide
PROBLEM | POSSIBLE CAUSE | SOLUTION | ||
|
|
|
| |
The memory is erased when | The battery wire has not been connected to the proper | Connect the wire correctly, referring to the section on | ||
the ignition is turned off. | terminal. | "Connecting Wires to Terminals". | ||
|
|
|
| |
|
| The ignition and battery wire are incorrectly connected. | Connect the wire correctly, referring to the section on | |
|
|
| "Connecting Wires to Terminals". | |
|
|
|
| |
A CD ejects as soon as it is | The CD is | Load the CD with the labeled side up. | ||
loaded. |
|
| ||
The CD is quite dirty. | Clean the CD, referring to the section on "Cleaning CDs" | |||
|
| |||
|
|
| (see p. 6). | |
|
|
|
| |
The sound skips on a CD. | The CD is scratched or dirty. | Clean the CD, referring to the section on "Cleaning CDs" | ||
|
|
| (see p. 6). | |
|
|
|
| |
A track will not play. | Random play has been selected. | Turn off random play. | ||
|
|
| ||
The DSP effects are | You are using a | Use a front/rear | ||
imperceptible. |
|
| ||
|
|
|
| |
|
| The front and rear output are reversed. | Connect the wire correctly, referring to the section on | |
|
|
| "Connecting Wires to Terminals". | |
|
|
|
| |
|
| The + and - of speakers are reversed. | Connect the wire correctly, referring to the section on | |
|
|
| "Connecting Wires to Terminals". | |
|
|
|
| |
|
| The fader or balance settings are set all the way to one | Reset the fader or balance settings. | |
|
| side. |
| |
|
|
|
| |
— 34 —