Installation (for TOYOTA, NISSAN Car etc.)
2CAUTION
When performing a check of the CD operation prior to installation, place this unit in a hirizontal position and perform a loading/eject of the CD.
■Installation
Install onto the car bracket using the supplied screws (M5 ⋅ 6 mm). The holes of the car bracket to use will differ depending on the car model.
Accessory2 (M4 ⋅ 6 mm)
Installation (for HONDA ACURA Car)
You can choose from three installation types to fit your car. Perform "Assembly" before installation.
■Assembly
Fit the projections on both sides of the Accessories 6 and 7 into the slits on the Accessory4.
Accessory4 | Accessory0 |
| (M5 ⋅ 6 mm) |
Bottom panel
When a ground wire is included in the wiring kit (which is sold separately), fasten the ground wire with the binding screw located on the rear panel of this unit.
Accessory1 or Accessory0 (M5 ⋅ 6 mm)
(The application |
|
position of | Accessory6 (L) |
Accessory5 is at the |
bottom panel)
Accessory0
Accessory3 (Only for NISSAN car)
(M5 ⋅ 6 mm) Accessory7 (R)
— 31 —