Philips M355 warranty General, Are pressed, Sound cannot be heard or is of poor, Quality

	Troubleshooting
En	GENERAL
	The system does not react when buttons
gli
	are pressed.
sh	Sound cannot be heard or is of poor
	quality.

The left and right sound outputs are reversed.

The remote control does not function properly.

The timer is not working.

Not all lighted buttons are showing light.

The Clock/Timer setting is erased.

The system displays features automatically.

30

pg 001-031/M355/37-Eng 30

–Remove and reconnect the AC power plug and switch on the system again.

–Adjust the volume.

–Disconnect the headphones.

–Check that the speakers are connected correctly.

–Check if the stripped speaker wire is clamped.

–Make sure the MP3-CD was recorded within 32-256 kbps bit rate with sampling frequencies at 48 kHz, 44.1 kHz or 32 kHz.

–Check the speaker connections and location.

–Select the source (CD 1/2/3 or TUNER, for

example) before pressing the function button (É,í,ë).

–Reduce the distance between the remote control and the system.

–Insert the batteries with their polarities (+/– signs) aligned as indicated.

–Replace the batteries.

–Point the remote control directly towards the IR sensor .

–Set the clock correctly.

–Press and hold CLOCK•TIMER to switch on the timer.

–If recording or tape dubbing is in progress, stop recording.

–Press DIM to select DIM OFF display mode.

–Power has been interrupted or the power cord has been disconnected. Reset the clock/timer.

–Press and hold Çon the system to switch off the demonstration.

4/17/02, 12:55 PM 3139 115 21402