— 14 —
English
Cassette player features
Loading and Playing Cassettes:
A press of the OPEN button results in the faceplate dropping
open to the front, thereby exposing the cassette insertion slot.
Holding the cassette with the tape exposed to the right, insert
it in the slot. The tape will start playing.
Push back on the right side of the faceplate with your hand
until it locks.
The indicator lights up when a cassette has been loaded.
When inserting a cassette make sure the cassette has been
completely drawn in before pushing back the faceplate. Failing to
do so might deform the tape.
Playing Cassettes Already Loaded:
Press the SRC (Source) button repeatedly to select the tape
mode.
"TAPE" is displayed when the tape mode has been selected.
The tape will start playing.
Listening to the other side:
Press the 38 button.
Tape play switches to the other side.
Ejecting Cassettes:
Press the OPEN button and drop open the faceplate.
Press the 0button located near the cassette insertion slot.
The tape stops playing and the cassette ejects.
Push back on the right side of the faceplate with your hand
until it locks.
•When the faceplate has been dropped open, it might interfere
2CAUTION
2CAUTION
Playing Cassette Tapes with the shift lever or something else. If this happens, pay
attention to safety and move the shift lever or take an
appropriate action, then operate the unit.
•Do not apply excessive force to the open faceplate or place
objects on it. Doing so will cause damage or breakdown.
•Do not use the unit with the faceplate in the open condition.
Doing so will cause breakdown.
Remove a cassette from the unit when not listening to it for a
while. If you leave it in the unit too long, the tape may stick to
the tape head and cause the unit to malfunction.
NOTE
Fast Forwarding Tapes:
Press the FM button.
Rewinding Tapes:
Press the AM button.
Canceling:
Press the 38 button.
Normal tape play will begin.

Fast Forwarding and Rewinding Cassette Tapes

Listen to tapes recorded using Dolby B NR.
Turning Dolby B Noise Reduction On/Off:
Press the B NR button to switch Dolby B NR on and off.
The B NR indicator lights up when it is turned on.

Using Dolby B Noise Reduction

Select type of tape being played.
Switching Tape Types:
Press the METAL (Metal) button to switch the metal tape
indicator on and off and to select the tape type.

Switching Tape Types

0button
03.DPX-4020_M_US_PH4 02.6.3 3:54 PM Page 14