— 22 —
English
CD/External disc control features
This function permits the text to be scrolled and the entire text
to be displayed. The scrolling method differs depending on the
setting of scrolling in the menu.
To scroll automatically:
Press the DISP button to display the disc title or the track title.
The display of the text will be scrolled repeatedly.
To scroll manually:
Press the DISP button to display the disc title or the track title.
Press the 1 button.
The display of the text will be scrolled once.
•Please see the function set system (page 29) about switching
between manual scrolling and automatic scrolling.
•Only units with a CD text feature permit title display.
NOTE
2
1
Text / Title Scroll
Store the names of discs to be displayed when played.
Play the disc whose name you want to preset.
•This function is not available for disc changers that do not
feature the Disc Name Preset function.
•The disc name preset function cannot be used when a clock is
displayed.
•Disc Name Preset can’t be done in MD or AUX.
Press the NAME.S button for at least two seconds.
"Name Set" is displayed and the disc name preset mode is
entered.
The cursor blinks in the position where character input can be
made.
Press either the 4or ¢button to move the cursor to the
desired position.
The 4button moves the cursor to the left, and the ¢
3
2
NOTE
1
Presetting Disc Names (DNPS)
button to the right.
You can also move the cursor left or right by pressing the 4
or ¢buttons, respectively, on the remote.
Each press of the 38 button results in the type of characters
that are to be entered changing between alphabet and
numerals/symbols.
Press the DISC+or DISC–button to display the desired
character.
Characters that can be displayed are as follows.
Direct Alphabet Input
(Function of remote with number/letter entry buttons)
If the disc changers that were manufactured and sold after 1997
(except for KDC-C560) are connected, you can directly input
letters using the number/letter entry buttons on the remote.
Example: Use the following table to enter the name "DANCE”.
Continue steps 3 and 4 until all the characters are chosen for
the name.
You can enter up to 8 characters for each name.
Press either the NAME.S button on the main unit or the OK
button on the remote.
6
NOTE
5
Button to press # Times pressed
Character
#3 1
1#2
#6 2
#2 3
#3 2
“D”
“A”
“N”
“C”
“E”
NOTE
Alphabet (upper case)/Numerals/Symbols:
A ~ Z 0~9 / + –
Alphabet (lower case)/Numerals/Symbols:
a ~ z 0~9 / + –
4
DPX-5050_M_r1_U.S 03.1.21 0:02 PM Page 22