Menu system

In CD/ USB mode

ACDrive firmware version display

Displaying the firmware version with the ACDrive function.

1Select the firmware version display mode Push the Control knob towards [FM] or [AM]. Select the "ACD F/W Version" display.

2Display the ACDrive firmware version Push the Control knob towards [4] or [¢].

In CD/ USB mode

Unique ID display

Displaying the serial number for each product.

1Select the unique ID display modePush the Control knob towards [FM] or [AM]. Select the "ACD Unique ID" display.2Display the unique ID

Push the Control knob towards [4] or [¢].

Other than Standby mode

Audio Preset Memory

Registering the value setup by Sound Control. The memory cannot be erased by the Reset button.

1Setup Sound Control

Refer to the following operations to setup the Sound Control.

-<Audio Control> (page 11)

-<Audio Setup> (page 12)

2Enter Menu mode

Press the [MENU] button for at least 1 second. "MENU" is displayed.

3Select Audio Preset modePush the Control knob towards [FM] or [AM]. Select the "Audio Preset" display.4Enter Audio Preset mode

Press the Control knob for at least 1 second.

5Select the Audio Preset MemoryPush the Control knob towards [FM] or [AM]. Select the "Memory" display.

34 English

6Put the Audio Preset in the memory

Press the Control knob for at least 2 seconds. The "Memory" display blinks 1 time.

7Exit Audio Preset mode Press the [MENU] button.

•Register 1 pair of Audio Preset Memory. You cannot register by the source.

•When you press the Reset, all the sources will be the setting value which is registered.

•The following items cannot be registered.

Volume, Balance, Fader, Loudness, Volume offset, Dual Zone System, Rear Volume

Other than Standby mode

Audio Preset Recall

Recalling the sound setup registered by <Audio Preset Memory> (page 34).

1Select the source Press the [SRC] button.

2Enter Menu mode

Press the [MENU] button for at least 1 second. "MENU" is displayed.

3Select Audio Preset mode

Push the Control knob towards [FM] or [AM]. Select the "Audio Preset" display.

4Enter Audio Preset mode

Press the Control knob for at least 1 second.

5Select the Audio Preset RecallPush the Control knob towards [FM] or [AM]. Select the "Recall" display.6Recall the Audio Preset

Press the Control knob for at least 2 seconds. The "Recall" display blinks 1 time.

7Exit Audio Preset mode Press the [MENU] button.

•The User memory of <System Q> (page 11) is changed to the value which was recalled.

•The source tone memory item of <Audio Control> (page 11) is changed to the value which was recalled by the selected source.