Menu system

When LX AMP unit connecting

AMP Control

You can control the LX AMP connected to the unit.

1Select AMP Control modePush the Control knob towards [FM] or [AM]. Select the "AMP Control" display.2Enter AMP Control modePress the Control knob for at least 1 second.

3Select the AMP Control item for adjustment Push the Control knob towards [FM] or [AM].

•For the details on the AMP Control item, see the Instruction manual attached to the LX AMP.

4Adjust the AMP Control item

Push the Control knob towards [4] or [¢].

5Exit AMP Control mode Press the [MENU] button.

•You cannot use the LX AMP operation during standby mode.

In FM reception

CRSC (Clean Reception System Circuit)

Temporarily have reception alternate from stereo to mono to reduce multi-path noise when listening to the FM station.

Display

Setting

"CRSC : ON"

The CRSC is ON.

"CRSC : OFF"

The CRSC is OFF.

•Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF.

32 English

Station/Disc Naming (SNPS/DNPS)

Attaching a title to a Station or CD.

1Receive/play the station/disc you want to attach a title to

•A title cannot be attached to MD or Audio file media.

2Enter Menu mode

Press the [MENU] button for at least 1 second. "MENU" is displayed.

3Select Name set modePush the Control knob towards [FM] or [AM]. Select the "Name Set" display.4Enter Name set mode

Press the Control knob for at least 1 second.

5Move the cursor to the enter character position

Push the Control knob towards [4] or [¢].

6Select the character type Press the Control knob.

Each time you press the knob, the character type alternates between the types shown in the table below.

Character type Alphabet upper case Alphabet lower case Numbers and symbols

Special characters (Accent characters)

7Select the characters

Push the Control knob towards [FM] or [AM].

•Enter characters by using a remote control with numbers buttons.

Example: If you are entering "DANCE".

CharacterButtonTimes pressed

"D"

[3]

1

"A"

[2]

1

"N"

[6]

2

"C"

[2]

3

"E"

[3]

2

8Repeat steps 5 through 7 and enter the name.9Exit Menu mode

Press the [MENU] button.