Removing the Unit
Removing the hard rubber frame
1Engage the catch pins on the removal tool 4 and remove the two locks on the lower level.
Lower the frame and pull it forward as shown in the figure.
Removing the Unit
1 | Remove the hard rubber frame by |
| referring to the removal procedure in |
| the section <Removing the Hard Rubber |
2 | Frame>. |
Insert the two removal tools 4 deeply | |
| into the slots on each side, as shown. |
Lock
Catch
3 Lower the removal tool toward the |
bottom, and pull out the unit halfway |
while pressing towards the inside. |
Removal tool (Accessory4)
⁄
•The frame can be removed from the top side in the same manner.
2When the lower level is removed, remove the upper two locations.
¤
•Be careful to avoid injury from the catch pins on the removal tool.
4Pull the unit all the way out with your hands, being careful not to drop it.
14 Quick Start Guide