Menu system
In Standby mode
Built-in Amp Setting
Controlling the
Turning OFF this control enhances the preout quality.
Display | Setting |
"AMP ON" | The |
"AMP OFF" | The |
Other than Standby mode/
When the Dual Zone System is ON
Dual Zone System Setting
Setting the Front channel and Rear channel sound in the Dual Zone System.
Display | Setting |
"ZONE2 R" | Sub source (Auxiliary input source) is to be rear |
| channel. |
"ZONE2 F" | Sub source (Auxiliary input source) is to be front |
| channel. |
In Audio file source
Supreme Setting
When AAC, MP3 or WMA files encoded at a low bit rate (less than 96kbps (fs=44.1k, 48kHz)) are played, this function restores their high frequency region to approach the sound quality of equivalents of these files encoded at a high bit rate. Processing is optimized for the compression format used (AAC, MP3, or WMA), and adjustment is made for the bit rate used.
Display | Setting |
"SPRM ON" | Plays sound using the Supreme function. |
"SPRM OFF" | Plays the original sound stored in the audio file. |
⁄
•The sound effect may be imperceptible depending on the relationship between the audio file format and setting.
•This function is not available on the iPod.
Other than Standby mode
Traffic Information
Switching to traffic information automatically when a traffic bulletin starts even when you aren’t listening to the radio.
Display | Setting |
"TI OFF" | The Traffic Information function is OFF. |
"TI ON" | The Traffic Information function is ON. |
When it is ON, the "TI" indicator is ON. When a traffic information station isn’t being received the "TI" indicator blinks.
When a traffic bulletin starts, "TRAFFIC" is displayed it and it switches to traffic information.
⁄
•During reception of an AM station when the Traffic Information function is turned ON, it switches to an FM station.
•During reception of traffic information the adjusted volume is automatically remembered, and the next time it switches to traffic information it’s automatically the remembered volume.
Receiving other traffic information stations (In tuner source)Push the Control knob towards [4] or [¢].
⁄
•You can change the traffic information station when listening to the radio.
In FM reception
CRSC (Clean Reception System Circuit)
Temporarily have reception alternate from stereo to mono to reduce
Display | Setting |
"CRSC ON" | The CRSC is ON. |
"CRSC OFF" | The CRSC is OFF. |
⁄
•Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF.
26 English