48
Chapter 6: Various Setups
Various Setups
"SOUND" Setting

When "SOUND" is selected in "SET UP

MENU":
"SOUND" is to be selected when you want to set the
audio output method when system components are
connected using the digital audio output connector of
the player.
When the system is connected using the 6CH. OUTPUT
jacks of the player, also select "SOUND" to set the
speakers, audio output during DVD or VCD search,
dynamic range control function and audio filters.
Operation procedure
1. While the player is in stop mode, press the SET UP
button and press the cursor up/down button to display
the "SOUND" menu of "SET UP MENU".
2. Press the ENTER button to open the setup screen.
EXIT
MENU
Digital Audio
Dolby Digital
Speaker Setting (Custom)
Speaker Setting (Quick)
Audio During Search
Dynamic Range Control
Audio Filter
DTS
MPEG
PCM Down Conversion
SOUND
7
On
7
Bitstream
7
Bitstream
7
Bitstream
7
On
7
Normal
7
Filter 60kHz
3. In the setup menu, select the Function Item (refer to
Right Table) by pressing the cursor up/down button
and press the ENTER button.
4. Select the Setting Item (refer to Right Table) by
pressing the cursor up/down button, then press the
ENTER button to enter the selection in memory.
"" : Select to return to the previous screen.
Switches on/off the down-
sampling conversion for the
digital signal output with a high
sampling rate.
Digital Audio
"PCM Down
Conversion"
On
Off On
Icon Function Icon Means
Down-convert the signal to 44.1 kHz/48 kHz/16-
bit PCM signal.
The analog output signals are converted
accordingly.
Skip down conversion.
Sets the Dolby Digital output.Digital Audio
"Dolby Digital" Bitstream
PCM
Bitstream signal.
48 kHz (2CH.) PCM signal.
Bitstream
Sets the DTS output.Digital Audio
"DTS" Bitstream
PCM
Bitstream signal.
48 kHz (2CH.) PCM signal.
Bitstream
÷With DVD AUDIO discs, the
signal is always output after
down sampling conversion.
÷If the disc inhibits the 96 kHz digital output,
the signal is down-converted even when this
setting is selected.
Speaker Setting
(Quick)
Speaker Setting
(Custom)
Table : SET UP MENU "SOUND" Function & Setting (1/2)
Function Item Setting Item
p
W
Initial
Position
Sets the MPEG output.Digital Audio
"MPEG" Bitstream
PCM
Bitstream
Bitstream signal.
48 kHz (2CH.) PCM signal.