Kenwood DVF-J6050 manual 78

Chapter 8 Chapter 7 Chapter 6 Chapter 5 Chapter 4 Chapter 3 Chapter 2 Chapter 1

Chapter 7 : Various Setups

7-4-2"Speaker Setting" (DV-5900M only)

This unit has two kinds of speaker setting methods.

"Speaker Setting Custom"	k
This is the normal setting operation.
"Speaker Setting Quick"	;
This is the simplified setting operation.

a : Speaker Setting Custom

At the factory, the player has been set to the standard setting with which the speakers can reproduce the 6- channel signals as soon as the connections are made. This setting can be changed according to each listening environment. When you want to change this setting, be sure to perform it in the listening area in your own listening environment.

Operation procedure

1.While the player is in stop mode, press the SET UP button and press the cursor up, down button to display the “SOUND” menu of “SET UP MENU”.

2.Press the ENTER button to open the setup screen.

3.Press the cursor up, down button to select “Speaker Setting (Custom)” in set up menu “SOUND”, then press the ENTER button.

Table : “Speaker Setting CUSTOM” Function & Setting (1/2)

	Speaker Item		Function Item			Setting Item	Initial
							Position
Icon	Speaker	Icon		Function	Icon	Means
L	L ch front speaker				Normal	Select this position when
						speaker is incapable of
		Size		Low cut filter		reproduce audio below 100 Hz.	Large
R	R ch front speaker				Large	Select this position when
						speaker is capable of reproduce
						audio below 100 Hz.
		Level		Set the volume level	0 to -12 dB	––	0 dB
C	Center speaker					No center channel output.
					Off	Select when Center speaker is
						not used.
				Center channel output
		Size			Normal	Select this position when
				ON/OFF			Large
						speaker is incapable of
				Low cut filter		reproduce audio below 100 Hz.
					Large	Select this position when
						speaker is capable of reproduce
						audio below 100 Hz.
		Delay		Set delay time	0/1.3/2.6/		0 ms
				See “Delay Time Setting”		––
		Time			3.9/5.3
				A
		Level		Set the volume level	0 to -12 dB	––	0 dB
SL	L ch surround speaker					No surround channel output.
					Off	Select when Surround speaker is
						not used.
				Surround channel output
SR	R ch surround speaker	Size			Normal	Select this position when
				ON/OFF			Large
						speaker is incapable of
				Low cut filter		reproduce audio below 100 Hz.
					Large	Select this position when
						speaker is capable of reproduce
						audio below 100 Hz.
		Delay		Set delay time	0/5.3/10.6/	––	0 ms
		Time		See “Delay Time Setting”	15.9
				A
		Level		Set the volume level	0 to -12 dB	––	0 dB

78