Kenwood DVT-6200 - page 23

DVT-6200 (EN/K,E,X)
Set Up functions
23
Preparations
Please refer to pages 18 and 19 for setup.
3Press Cursor up/down (5/∞) keys on the remote
to select DYNAMIC, then press the Cursor right
(3) key to access the sub features
1During stop mode, press MENU key on the re-
mote.
2Press Cursor up/down (5/∞) keys on the re-
mote to select the AUDIO SETUP, then press
the ENTER key to access the sub features
4Press Cursor up/down (5/∞) keys on the remote
to select specific dynamic range, then press the
ENTER key.
7Press Cursor up/down (5/∞) keys on the remote
to select EXIT SETUP, then press the ENTER key.
Select Dynamic Range
5Press Cursor left (2) key on the remote to return
to previous menu.
6Press Cursor up/down (5/∞) keys on the remote
to select MAIN PAGE, then press the ENTER key.
This function operates only at the time of playback of
DVDs recorded with Dolby Digital.
3Press Cursor up/down (5/∞) keys on the remote
to select VIDEO OUTPUT, then press the Cursor
right (3) key to access the sub features
1During stop mode, press MENU key on the re-
mote.
2Press Cursor up/down (5/∞) keys on the re-
mote to select the PREFERENCE, then press the
ENTER key to access the sub features
4Press Cursor up/down (5/∞) keys on the remote
to select S.VIDEO or COMPONENT then press
the ENTER key.
7Press Cursor up/down (5/∞) keys on the remote
to select EXIT SETUP, then press the ENTER key.
Select VIDEO Output
(only for some areas)
5Press Cursor left (2) key on the remote to return
to previous menu.
6Press Cursor up/down (5/∞) keys on the remote
to select MAIN PAGE, then press the ENTER key.
03.7.8, 11:06 AMPage 23