Kenwood DVT-6200 - page 21

DVT-6200 (EN/K,E,X)
Set Up functions
21
Preparations
3Press Cursor up/down (5/∞) keys on the remote
to select ANGLE MARK, then press the Cursor
right (3) key to access the sub features
1During stop mode, press MENU key on the re-
mote.
2Press Cursor up/down (5/∞) keys on the re-
mote to select the GENERAL SETUP, then
press the ENTER key to access the sub fea-
tures
4Press Cursor up/down (5/∞) keys on the remote
to select ON or OFF, then press the ENTER key.
7Press Cursor up/down (5/∞) keys on the remote
to select EXIT SETUP, then press the ENTER key.
Select ANGLE mark ON or OFF
5Press Cursor left (2) key on the remote to return
to previous menu.
6Press Cursor up/down (5/∞) keys on the remote
to select MAIN PAGE, then press the ENTER key.
Please refer to pages 18 and 19 for setup.
3Press Cursor up/down (5/∞) keys on the remote
to select OSD LANG, then press the Cursor right
(3) key to access the sub features
1During stop mode, press MENU key on the re-
mote.
2Press Cursor up/down (5/∞) keys on the re-
mote to select the GENERAL SETUP, then
press the ENTER key to access the sub fea-
tures
4Press Cursor up/down (5/∞) keys on the remote
to select specific language, then press the EN-
TER key.
7Press Cursor up/down (5/∞) keys on the remote
to select EXIT SETUP, then press the ENTER key.
Select OSD Language
5Press Cursor left (2) key on the remote to return
to previous menu.
6Press Cursor up/down (5/∞) keys on the remote
to select MAIN PAGE, then press the ENTER key.
03.7.8, 11:06 AMPage 21