Kenwood DVT-6200 - page 20

DVT-6200 (EN/K,E,X)
Set Up functions
20
Preparations
Select TV Display Select Picture Mode
3Press Cursor up/down (5/∞) keys on the remote
to select TV DISPLAY, then press the Cursor
right (3) key to access the sub features
1During stop mode, press MENU key on the re-
mote.
2Press Cursor up/down (5/∞) keys on the re-
mote to select the GENERAL SETUP, then
press the ENTER key to access the sub fea-
tures
4Press Cursor up/down (5/∞) keys on the remote
to select TV Display type, then press the ENTER
key.
5Press Cursor left (2) key on the remote to return
to previous menu.
6Press Cursor up/down (5/∞) keys on the remote
to select MAIN PAGE, then press the ENTER key.
7Press Cursor up/down (5/∞) keys on the remote
to select EXIT SETUP, then press the ENTER key.
3Press Cursor up/down (5/∞) keys on the remote
to select PIC MODE, then press the Cursor right
(3) key to access the sub features
1During stop mode, press MENU key on the re-
mote.
2Press Cursor up/down (5/∞) keys on the re-
mote to select the GENERAL SETUP, then
press the ENTER key to access the sub fea-
tures
4Press Cursor up/down (5/∞) keys on the remote
to select specific mode, then press the ENTER
key.
7Press Cursor up/down (5/∞) keys on the remote
to select EXIT SETUP, then press the ENTER key.
5Press Cursor left (2) key on the remote to return
to previous menu.
6Press Cursor up/down (5/∞) keys on the remote
to select MAIN PAGE, then press the ENTER key.
Please refer to pages 18 and 19 for setup.
03.7.8, 11:06 AMPage 20