Kenwood FP510 series manual to use the cutting discs, to use the citrus press, 26mill, safety

safety

●Never remove the lid until the cutting disc has completely stopped.

●Handle the cutting discs with care - they are extremely sharp

to use the cutting discs

1	Fit the drive shaft and bowl onto the power unit.
2	Holding by the centre grip d , place the disc onto the	e	d
	drive shaft with the appropriate side uppermost e .
3	Fit the lid.
4	Choose which size feed tube you want to use. The
	pusher contains a smaller feed tube for processing
	individual items or thin ingredients.
	To use the small feed tube - first put the large pusher
	inside the feed tube.
	To use the large feed tube - use both pushers
	together.

5Put the food in the feed tube.

6Switch on and push down evenly with the pusher - never put your fingers in the feed tube.

hints

●Use fresh ingredients

●Don’t cut food too small. Fill the width of the large feed tube fairly full. This prevents the food from slipping sideways during processing. Alternatively use the small feed tube.

●When using the chipper disc, place ingredients horizontally.

●When slicing or shredding: food placed upright f comes out shorter than food placed horizontally g.

●There will always be a small amount of waste on the plate or in the bowl after processing.

f g

25 citrus press

Use the citrus press to squeeze the juice from citrus fruits (eg oranges, lemons, limes and grapefruits).

cone sieve

to use the citrus press		i
1	Fit the drive shaft and bowl onto the power
	unit.
2	Add the sieve and turn clockwise until the
	interlock fin on the sieve aligns with the line
	on the outlet cover h .
3	Place the cone over the drive shaft turning
	until it drops all the way down i .	h
4	Cut the fruit in half. Then switch on and
	press the fruit onto the cone.

●The citrus press will not operate if the sieve is not locked correctly.

26mill

Use the mill for milling herbs, nuts and coffee beans.

blade unit sealing ring jar sprinkler lid

safety

●Never fit the blade unit to your machine without the jar fitted.

●Never unscrew the jar while the multi-mill is fitted to your machine.

●Don’t touch the sharp blades. Keep the blade unit away from children.

●Never remove the multi-mill until the blades have completely stopped.

important

●To ensure long life of your mill, never run for longer than 30 seconds. Switch off as soon as you’ve got the right consistency.

●Don’t process spices - they may damage the plastic.

●The machine won’t work if the mill is fitted incorrectly.

●Use for dry ingredients only.

to use your mill

1Put your ingredients into the jar. Fill it no more than half full.

2Fit the sealing ring into the blade unit.

3Turn the blade unit upside down. Lower it into the

	jar, blades down.
4	Screw the blade unit onto the jar until it is finger
	tight.	j
5	Remove the liquidiser outlet cover by turning in an
	anti clockwise direction.
6	Place the mill on the liquidiser outlet and turn to lock
	in a clockwise direction j .
7	Switch on to maximum speed or use the pulse
	control.
8	After milling, you can replace the blade unit with the
	sprinkler lid and shake out your food.

●The sprinkler lid is not airtight. hints

●Herbs are best milled when clean and dry.

27KENSTORE™ attachments carousel

Your food processor is supplied with an attachment storage carousel that fits inside the bowl.

to use the storage carousel

1Fit the knife blade to the bowl.

2Then fit the whisk, discs and canopy into the carousel k .

3Fit the carousel over the knife blade and place the processor lid on top l

l

k l

4