before using your Kenwood appliance

Read these instructions carefully and retain for future reference.

Remove all packaging and any labels.

safety

The blades and discs are very sharp, handle with care. Always hold the knife blade by the finger grip at the top, away from the cutting edge, both when handling and cleaning.

Do not lift or carry the processor by the handle - or the handle may break resulting in injury.

Always remove the knife blade before pouring contents from the bowl.

Keep hands and utensils out of the processor bowl and liquidiser goblet whilst connected to the power supply.

Switch off and unplug:

before fitting or removing parts

after use

before cleaning

Never use your fingers to push food down the feed tube. Always use the pusher/s supplied.

Never fit the blade unit to the power unit without the liquidiser or mini chopper/mill jar fitted.

Before removing the lid from the bowl or liquidiser or mini chopper/mill from the power unit:-

switch off;

wait until the attachment/blades have completely stopped;

be careful not to unscrew the liquidiser goblet or mini chopper/mill from the blade assembly.

Liquids should be allowed to cool to room temperature before blending.

Do not use the lid to operate the processor, always use the on/off speed control.

This machine will be damaged and may cause injury if the interlock mechanism is subjected to excessive force.

Never use an unauthorised attachment.

Never leave the machine on unattended.

Never use a damaged machine. Get it checked or repaired: see ‘service and customer care’.

Never let the power unit, cord or plug get wet.

Don’t let excess cord hang over the edge of a table or worktop or touch hot surfaces.

Do not exceed the maximum capacities stated in the recommended speed chart.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.

Misuse of your processor/liquidiser can result in injury.

Refer to the relevant section under “using the attachments” for additional safety warnings for each individual attachment.

before plugging in

Make sure your electricity supply is the same as the one shown on the underside of your machine.

Important – UK only

The wires in the cord are coloured as follows: Blue = Neutral,

Brown = Live.

The appliance must be protected by a 13A approved (BS1362) fuse.

Note:

For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service).

If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY.An electric shock hazard may arise if an unwanted non-rewireable pug is inadvertently inserted into a 13A socket outlet.

This appliance conforms to EC directive 2004/108/EC on Electromagnetic Compatibility and EC regulation no. 1935/2004 of 27/10/2004 on materials intended for contact with food.

before using for the first time

1Remove all packaging including the plastic blade covers from the knife blade. Take care the blades are very sharp. These covers should be discarded as they are to protect the blade during manufacture and transit only.

2Wash the parts see ‘cleaning’

3Push excess cord into the back of the machine.

key

processor

￿power unit

￿detachable drive shaft

￿bowl

￿lid

￿feed tube

￿pushers

￿safety interlocks

￿cord storage

￿speed control

liquidiser

￿filler cap

￿lid

￿goblet

￿sealing ring

￿blade unit

2

Page 3
Image 3
Kenwood FP734, FP735 manual Safety, Key Processor, Liquidiser

FP734, FP735 specifications

The Kenwood FP735 and FP734 are versatile food processors that have gained popularity among home cooks and culinary enthusiasts, thanks to their robust designs and impressive features. These kitchen appliances are engineered to simplify food preparation, making it an efficient and enjoyable process.

One of the standout features of both models is their powerful motor. The FP735 is equipped with a 1000-watt motor, while the FP734 has a slightly lesser power output. This high wattage ensures that both food processors can handle tough ingredients, from hard vegetables to thick doughs, without straining. Their efficiency is further enhanced by a selection of stainless-steel blades and discs that allow for various food processing tasks, including chopping, slicing, grating, and blending.

Another key highlight is the capacity of their bowls. The FP735 features a generous 3-liter bowl, perfect for larger batches of food preparation, while the FP734 has a similar yet slightly smaller capacity. This allows for versatility in cooking, whether it’s preparing meals for a family or experimenting with ingredients for a smaller gathering.

Both models are designed with user convenience in mind, offering easy-to-use controls. They feature multiple speed settings that cater to different processing needs, allowing users to achieve the desired texture, from coarse to fine. Additionally, a pulse function is available for those who prefer precise control over their processing tasks.

Safety is paramount in kitchen appliances, and both the FP735 and FP734 are built with safety features such as a locking mechanism that ensures the bowl and lid are securely in place during operation. This prevents accidents and provides peace of mind for users.

In terms of technology, Kenwood has integrated a robust design that ensures longevity and reliability. The appliances are built with durable materials, making them resistant to wear and tear over time. Easy assembly and disassembly are also key advantages, allowing for quick cleaning and storage.

The stylish design of the Kenwood FP735 and FP734 allows them to seamlessly blend into any kitchen decor. Available in a range of colors, these food processors not only perform well but also add a touch of modernity to the kitchen.

In conclusion, the Kenwood FP735 and FP734 are excellent choices for anyone looking to elevate their cooking experience. With powerful motors, versatile functions, safety features, and stylish designs, they represent a perfect balance of performance and aesthetic appeal in the world of food processing.