Kenwood FPP210 series Using the attachments, Knife blade, Emulsifying tool, Slicing/grating disc

using the attachments

Refer to recommended speed chart for each attachment.

￿knife blade

The knife blade is the most versatile of all the attachments. The length of the processing time will determine the texture achieved. For coarser textures use the pulse control.

Use the knife blade for cake and pastry making, chopping raw and cooked meat, vegetables, nuts, pate, dips, pureeing soups and to also make crumbs from biscuits and bread.

It can also be used for yeasted dough mixes if the dough too l is not supplied.

hints

●Cut food such as meat, bread, vegetables into cubes approximately 2cm/3/4in before processing.

●Biscuits should be broken into pieces and added down the feed tube whilst the machine is running.

●When making pastry use fat straight from the fridge cut into 2cm/3/4in.cubes.

●Take care not to over-process.

￿dough tool (if supplied)

Use for yeasted dough mixes.

●Place the dry ingredients in the bowl and add the liquid down the feed tube whilst the machine is running. Process until a smooth elastic ball of dough is formed this will take 60 secs.

●Re-knead by hand only. Re-kneading in the bowl is not recommended as it may cause the processor to become unstable.

￿emulsifying tool

Use for light mixtures only eg cream, mayonnaise.

hints

●Ensure the bowl and tool are clean and free from grease before use.

slicing/grating disc

To use the disc.

reversible slicing/grating disc

Use the grating side for cheese, carrots, potatoes and foods of a similar texture.

Use the slicing side for cheese, carrots, potatoes, cabbage, cucumber, courgette, beetroot and onions.

safety

●Never remove the lid until the cutting disc has completely stopped.

●Handle the cutting discs with care - they are extremely sharp

to use the cutting discs

1Fit the bowl onto the power unit, add the detachable drive shaft ￿.

2Holding by the centre grip, place the disc onto the drive shaft with the appropriate side uppermost.

3Fit the lid.

4Put the food in the feed tube.

5Switch on and push down evenly with the pusher - never put your fingers in the feed tube.

hints

●Use fresh ingredients

●Don’t cut food too small. Fill the width of the feed tube fairly full. This prevents the food from slipping sideways during processing.

●Food placed upright comes out shorter than food placed horizontal.

●There will always be a small amount of waste on the disc or in the bowl after processing.

citrus juicer (if supplied)

Use the citrus juicer to squeeze the juice from citrus fruits (eg oranges, lemons, limes and grapefruits).

cone sieve

to use the citrus juicer

1Fit the bowl onto the power unit, add the detachable drive shaft.

2Fit the sieve into the bowl - ensuring the sieve handle is locked into position directly over the bowl handle.

3Place the cone over the drive shaft turning until it drops all the way down.

4Cut the fruit in half. Then switch on and press the fruit onto the cone.

●The citrus juicer will not operate if the sieve is not locked correctly.

●For best results store and juice the fruit at room temperature and hand roll on a worktop before juicing.

●To help with juice extraction move the fruit from side to side when juicing.

●When juicing large quantities, empty the strainer regularly to prevent the build up of pulp and seeds.

5