Kenwood HM-331 5.Start recording, Pause the recording, Stop the recording, Points in CD recording, Select the source to be recorded, Blinks, Lights, Example:, “TAPE rec”

Pause the recording

		CD
		TAPE
TAPE rec	Blinks	REC

÷Press the “TAPE rec” key during recording. It stops after leaving a non-recorded blank of 4 seconds. (Press the key again to resume recording.)

Stop the recording

STOP

7

Let's recording 23

HM-331 (En/T)

Points in CD recording

When recording CD tracks onto a tape, if you leave the cassette deck in record-pause mode beforehand, the cassette deck recording can be started at the CD starts to be played. (Synchro recording function)

1Put the CD player in pause mode.2Select the track to be recorded with the skip (w2, 3·) keys.(The CD player pauses at the begin- ning of the selected track.)3Put the cassette deck in Record-pause mode.(Press “TAPE rec” key twice)4Start playing the CD. (Synchro recording starts)

÷Recording stops when the stop (7) key of the CD player is pressed.

		4.	Select the source to be recorded.			Basic
Select an input source other						section
than “TAPE”			TUNER (Broadcasts)
			CD	C D • • •	•	•
	Example:
			AUX (External input)
	To select the CD input			The character information
	Lights			display shows the recording
				input source.
	CD
6		4
			÷ If a CD has already been loaded, it starts to play now. Press the 7key to
			stop it.

5.Start recording.

TAPE rec	1Play (or tune) the input source to be recorded.
5	2Start recording.
	÷ Recording stops automatically when the tape side (s) to be recorded have
	been fully recorded.