46

Cassette deck

In case of difficulty

HM-331 (En/T)

Symptom

Cause

Remedy

 

 

Sound cannot be produced by

÷ The head is dirty.

÷ Clean the head referring to “Mainte-

e

 

pressing the play key.

÷ The tape is wound too tight due to

nance”.

 

 

÷ Try another tape.

 

 

 

irregular winding.

÷ Play a recorded tape.

 

 

 

÷ A nonrecorded tape is played.

 

 

 

 

 

 

 

No operation occurs even

÷ The cassette holder is not closed com-

÷ Close the holder completely.

*

 

when an operation key is

pletely.

÷ Press operation keys in more than a few

 

 

pressed.

÷ The operation key is pressed immedi-

 

 

 

ately after closing the cassette holder.

seconds after closing the cassette holder.

 

 

 

÷ The operation key is pressed in less than

÷ Press operation keys after waiting for

 

 

 

4 seconds after turning the power ON.

more than 4 seconds.

 

 

 

÷ A tape is not inserted in the unit.

÷ Insert a tape.

*

 

 

÷ The tape is wound too tight due to

÷ Try another tape.

 

 

 

irregular winding.

÷ Change the tape transport direction or

 

 

 

÷ The tape is fully wound to one of the

*

 

 

reels.

reverse the tape insertion orientation.

 

 

 

 

 

 

The cassette holders cannot

÷ The key is pressed during recording or

÷ Press in stop mode.

 

 

be opened by pressing the “0

playback.

÷ Reset the microcomputer.

 

 

push OPEN” area.

÷ The microcomputer is malfunctioning

r

 

 

due to external noise.

 

 

 

 

 

 

 

 

Sound is harsh or high fre-

÷ The head is dirty.

÷ Clean the head referring to “Mainte-

\

 

quencies are not reproduced.

÷ The tape is stretched or shrunk.

nance”.

e

 

 

÷ Try another tape.

 

 

 

 

 

 

 

Sound is distorted.

÷ The recording level has not been ad-

÷ Adjust the AUX input level.

 

 

 

justed. (During AUX input operation)

÷ Try another tape.

 

 

 

÷ The tape being played was recorded

 

 

 

with distorted sound.

 

 

 

 

 

 

 

 

Noise is noticeable.

÷ The tape head is magnetized.

÷ Demagnetize the head referring to “Main-

e

 

 

÷ External noise is induced.

tenance”.

 

 

÷ Install the system at a distance from

 

 

 

÷ A tape recorded with Dolby NR ON is

other electric appliances and TV.

 

 

 

÷ Set the "tape EQ." to on.

(

 

 

played with "tape EQ." off.

 

 

 

 

 

 

 

 

Sound vibrates.

÷ The capstans or pinch rollers are dirty.

÷ Clean the head referring to “Mainte-

e

 

 

÷ The tape is wound irregularly.

nance”.

 

 

÷ Wind the tape again by fast forwarding,

 

 

 

 

rewinding or playing from an end to the

(

 

 

 

other.

 

 

 

 

 

 

Recording cannot be started

÷ The recording protect tab of the cas-

÷ Use a cassette with an unbroken record-

5

 

by pressing the record key.

sette has been broken.

ing protect tab or block the hole.

 

 

÷ The cassette holder is not closed com-

÷ Close the holder completely.

*

 

 

pletely.

÷ Set the input selector to the source to be

 

 

 

÷ The TAPE input is selected.

£

 

 

÷ The tape is fully wound to one of the reels.

recorded.

 

 

÷ Change the tape transport direction or

*

 

 

 

reverse the tape insertion orientation.

 

 

 

 

 

 

Knowledge section