Kenwood HM-382MD Selecting characters using the , / , keys (Skip key mode)

53
Application section
MD Edit Functions
The character group which can be used in the "skip
key mode" are as follows.
Uppercase alphabet group
A to Z and space (1 blank character)
Lowercase alphabet group
a to z and space
Numeral and symbol group
0 to 9, space and symbols
Title group
Title memos ([123]), disc title and track titles
/CHARAC.
DISPLAY
P.CALL
SET
3Press the SET key to enter the selected
character.
Selecting characters using the
4or¢key (Skip key mode)
If "Aa" or "12" is displayed, press the 4or
¢key.
1Press the DISPLAY/CHARAC. key repeat-
edly to select a character group.
(Repeat steps 1 to 3 for each character to be
entered.)
2Press the 4 or ¢ key to move the
selection cursor on the desired charac-
ter.
÷Holding the 4 or ¢ key scrolls the display
so any character in the same character group
can be selected.
÷Press the 1 or ¡ key to move the input
location (cursor) to the left or right.
The cursor moves and waits for input of the next
character.
÷In the "Skip key mode" for character entry, a title memo or the title of another disc/track can be copied and entered in the
same way as the entry of alphabet characters. T
Selecting characters using the 4 / ¢ keys (Skip key mode)
Uppercase alphabet group
Lowercase alphabet group
Numeral and symbol group
Title group
ABCDEFGHIJKLMNOPQRSTUVWXYZ space
abcdefghijklmnopqrstuvwxyz space
0123456789 space ! ” # $ % & ’ ( ) * + , - . / : ; < = > ` ? @ space _
[1 2 3] [DISC] [001] [002] .........
Continued on next page
Example with an MD title