Recording on TAPE
26 EN
The tape deck of the unit can record signals only on Normal (Type ) tapes. It cannot record on High (Type
) and Metal (Type ) tapes.
Recording on TAPE
Start recording/ Pause the recording
Stop the recordingStop the recording
1Press the TAPE 2 3 key.
2Stop playback.
To reverse the transport direction :
÷When recording is started, the tape is transported in the direction se-
lected in this step.
Check the tape transport direction indicator. ¡
÷Search the position you want to start recording in advance.
1. Load a tape in deck.
Do not use a cassette with more than 90-minute recording time, for the
tape used with such a cassette is very thin and tends to cause troubles
such as entanglement around the pinch roller or cutting off tape.
÷When there is a tape slack, wind the tape before loading. W
1Press the area marked ) push open to open the cassette
holder.
2Insert a tape.
3Press the area marked ) push open to close the cassette
holder.
2. Select the tape transport direction.
5281/26-28/EN 6/13/02, 9:36 AM26