Barco MDCC 6130 manual Vesa-mount installation, To attach the panel unit to an arm stand

Vesa-mount installation

Vesa-mount installation

Important:

•Use an arm that is approved by VESA (according to the VESA 100 mm standard).

•Use an arm that can support a weight of at least 25 kg (55.12 lbs).

To attach the panel unit to an arm stand:

1.Release the display panel from the display stand as follows:

•Remove the neck cover (1) by sliding it upward.

•Lift the plastic frame (2) that covers the fixation of the panel to the stand. Turn it for 45 degrees to uncover the fixation screws.

•Unscrew the four fixation screws fixing the panel to the stand.

2

1

45