Barco MDCC 6130 Driver and Software Installation, Driver and software installation prerequisites

Driver and Software Installation

Driver and Software Installation

This chapter will guide you through the installation of the drivers, software and documentation associated with your Barco Coronis Fusion 6MP Display System or Barco Coronis Fusion 6MP Display(s).

Driver and software installation prerequisites

Note: To install or remove the drivers, software, or documentation you must be logged on as a user with administrator privileges.

Your operating system must be installed and running before you can install the driver, software and documentation for the Barco display controller(s) for your BARCO CORONIS FUSION 6MP Display System.

Before you begin make sure that all of your Barco Coronis Fusion 6MP Display(s) is connected to the appropriate display controller(s) in your system.

Note: This installation procedure is based on operating Windows in “Classic” theme. If “Aero” or “Basic” theme is selected in Windows, sections of this procedure may be different than what is listed.

Installing the BARCO MXRT drivers and software

Note: The installation dialog will display in English if your operating system’s language is not supported.

This process applies to the following versions of Windows:

• Windows 7 32 & 64 Bit

You will need to install the Barco Coronis Fusion 6MP Display system drivers and software in the following cases:

50