Barco MDCC 6130 manual Driver and Software Installation

Driver and Software Installation

•After you have installed the Barco display controller(s) for your BARCO CORONIS FUSION 6MP Display System in your system for the first time.

•After you have reinstalled or upgraded your operating system.

•When you upgrade to a newer version of the MXRT driver.

Note: You do not need to manually uninstall an existing driver before updating to the current version. The Barco Product Installation Wizard will detect any prior installations and start the uninstallation process automatically if necessary.

Note: When there is a non-Barco board in the system, we recommend that you first install the driver for the non-Barco board, prior to installation of the Barco driver. After each driver installation, you should reboot the system, before proceeding with installation of another driver.

1.Start your system. If you have a fresh OS installation, the OS will automatically install an ATI driver (Windows 7 inbox driver) for the Barco MXRT Graphics Card(s). When the OS prompts you to restart your computer, click yes, to allow the automatic driver installation to complete, and reboot the system.

2.Launch the Barco Product Installation Wizard. The installation Wizard should start automatically when you insert the Barco Display System Installation DVD into your computer's DVD drive. If the installation does not start, in the "auto play" window, click Run setup.exe.

3.If a previous installation of MXRT driver is present, the installation wizard will detect it and guide you through the uninstallation process if necessary.

4.By default, choose the Express Install option. The Master installer will install the following components:

a)BMSE

b)QAWebAgent

c)Graphics Driver

51