Barco MDCC 6130 manual General tips, If the display screen remains black after installation

General tips

General tips

•If one display from a multi-head system exhibits problems, try to eliminate the problem by switching video cables or power supplies. In that way you can find out if the problem resides in the display or not.

If the display screen remains black after installation:

Possible causes:

•Power is not properly connected

•Video cable is not properly connected

•Video cable is bad

•Display is switched off - activate the power button to switch it on

•PC is started up while the display was not connected - reboot the PC while all displays are connected

•Graphic board resolution is too high or too low

•Two displays with different resolution are connected to the same graphic board

•One of the heads of the graphic board is not attached in the display properties control panel

•PC is in stand-by mode

62