Barco MDCC 6130 manual Display parts, controls and connectors, LED indicator, Display controls

Display parts, controls and connectors

Display parts, controls and connectors

LED indicator

The LED color indicates the display’s power status:

Table 1:

Green	Display is on (when enabled in the OSD).
Orange	Display is in Standby power-saving mode.
Off	Display is disconnected from the power or the LED’s
	on state is disabled in the OSD.

Note: When the LED is disabled in the OSD, it will still be activated (green) when the display is on but does not receive any video signal.

Display controls

The display can be controlled by the control wheel under the bezel and the touch keys at the front. Both controls can be used simultaneously. They can be (both) disabled in the Settings menu.

Touch key controls

When you touch any of the keys while no on-screen display (OSD) is on the screen, the front illumination is switched on for a few seconds.

When you touch a key again while the illumination is on, the function of the key is executed.

33