Barco MDCC 6130 manual Display parts, controls and connectors

Display parts, controls and connectors

USB 2.0 devices are supported.

Note: The Barco Coronis Fusion 6MP Display disposes of 2 video inputs. You can connect both video inputs or just one input.

•When both inputs are used (DuoView), the signal on the “left” DVI connector (6) is shown on the left side of the screen and the signal on the “right” DVI connector (7) is shown on the right side of the screen. The video resolution of both signals must not exceed 1640x2048 pixels if you wish to display both signals seamlessly side by side. If the video resolution is higher, you can select to display only one input instead of both.

Note: For plug-and-play graphic boards (e.g., Barco display controller(s) for your BARCO CORONIS FUSION 6MP Display System) the output resolution of the graphic board(s) is determined by the setting in the Preferred Input function in the on-screen display (Settings menu). After changing this setting you need to reboot the PC for the graphic board(s) to change the output resolution accordingly.

39