Barco MDCC 6130 Display Controller Installation, Note The next step applies only to the MXRT

Display Controller Installation

7.Align the Barco display controller(s) for your BARCO CORONIS FUSION 6MP Display System with the slot(s) and press it(them) in firmly until the card(s) is(are) fully seated.

Note: The next step applies only to the MXRT 7300.

8.Connect the power cable to the 6-pin power connection on the graphics card. Make sure the cables are not interfering with anything inside the computer (for example, a cooling fan).

6-pin graphics controller power cable

Power connection for the MXRT 7300 controllers

9.Screw in or fasten the display controller securely. Replace and secure the computer cover.

10.Connect your Barco Coronis Fusion 6MP Displays to the Barco display controller(s) for your BARCO CORONIS FUSION 6MP Display System using the cables supplied. Make sure all cables are securely connected before turning on your system.

25