Connection

* Commercially available parts

2WARNING

To prevent fire caused by a short in the wiring, connect a fusible link or breaker nearby the battery’s positive terminal.

2CAUTION

•If sound is not output normally, immediately turn power off and check connections.

•Be sure to turn the power off before changing the setting of any switch.

•If the fuse blows, check wires for shorts, then replace the fuse with one of the same rating.

•Check that no unconnected wires or connectors are touching the car body. Do not remove caps from unconnected wires or connectors to prevent short circuits.

•Connect the speaker wires to appropriate speaker connectors separately. Sharing the negative wire of the speaker or grounding speaker wires to the metal body of the car can cause this unit to fail.

NOTE

•Do not connect cables and leads to both RCA cable input jacks and the speaker level input terminals simultaneously, for this may cause malfunction or damage.

Speaker level input connections

•The genuine-accessory car stereo shall have a maximum power output of no more than 40 W.

•The power is turned on and off as the unit detects input signal (Signal Sensing Turn-ON). There fore it is not necessary to connect the power control wire.

■RCA cable or Speaker level input connection

•RCA cable connections

Power control wire

 

CENTER UNIT

RCA cable*

(CD receiver, etc.)

Left input

 

40

 

Right input

LINE OUT terminal

• Speaker level input connections

Cable Color of the connector

 

 

 

 

 

Left

9White

 

Genuine-accessory car

 

·White/Black

 

stereo (No line output

 

 

 

 

Right

9 Gray

 

center unit etc.)

 

 

 

· Gray/Black

 

 

 

 

 

 

 

Speaker level input cable

40

Speaker output terminals

•Stereo Connections:

The speakers to be connected should have an impedance of 2Ω or greater.

•Bridged Connections:

Make connections to the LEFT channel 9 and the RIGHT channel · SPEAKER OUTPUT terminals.

The speakers to be connected should have an impedance of 4Ω or greater.

LINE OUT terminal

The signal that’s input from the line input terminal is output.

Fuse

40 A × 1

■Power wire and Speaker wire connection

 

Power control wire*

 

(RCA cable connection)

 

40

 

Lead terminal*

 

• Stereo Connections

Terminal cover

 

 

Right speaker

Battery wire*

Left speaker

 

Protective Fuse*

• Bridged Connections

Speaker (Bridged)

Battery

Ground wire*

4English