Installation
330mm
236mm
Ø4.6
218.4 mm | 230 mm |
Cooling fan | Cooling fan |
Installation board, etc. (thickness : 15 mm or more)
■ Accessories
Part name | External | Number of | |
View | Items | ||
| |||
| 4 | ||
(ø4 × 16 mm) |
| ||
|
| ||
Terminal cover |
| 1 | |
(Power terminal) |
| ||
|
| ||
Speaker level input |
| 1 | |
cable |
| ||
|
|
2CAUTION
•Do not install in the below locations; (Unstable location, In a location that interferes with driving, In a location that gets wet, In a dusty location, In a place that gets hot, In a place that gets direct sunlight, In a location that gets hit by hot air)
•Do not install the unit under the carpet. Otherwise heat
•Install this unit in a location which allows heat to easily dissipate.
Once installed, do not place any object on top of the unit.
•The surface temperature of the amplifier will become hot during use. Install the amplifier in a place where people, resins, and other substances that are sensitive to heat will not come into contact with it.
•This unit has cooling fan to decrease the internal temperature. Do not mount the unit in a place where the cooling fan and ducts of the unit are blocked. Blocking these openings will inhibit the cooling of the internal temperature and result in malfunction.
•When making a hole under a seat, inside the trunk, or somewhere else in the vehicle, check that there is nothing hazardous on the opposite side such as a gasoline tank, brake pipe, or wiring harness, and be careful not to cause scratches or other damage.
•Do not install near the dashboard, rear tray, or air bag safety parts.
•The installation to the vehicle should securely fasten the unit to a place in which it will not obstruct driving. If the unit comes off due to a shock and hits a person or safety part, it may cause injury or an accident.
•After installing the unit, check to make sure that electrical equipment such as the brake lamps, turn signal lamps and windshield wipers operate normally.
English 3