Connection
■RCA cable or Speaker level input connection
• RCA cable connections
RCA cable*
CENTER UNIT
(CD receiver, etc.)
Power control wire (Blue/ White)
A channel input B channel input
• Speaker level input connections
Cable Color of the connector
A channel | 9 White |
Left | · White/Black |
A channel | 9 Gray |
Right | · Gray/Black |
B channel | 9 Green |
Left | · Green/Black |
B channel | 9 Purple |
Right | · Purple/Black |
NOTE
•Do not connect cables and leads to both RCA cable input jacks and the speaker level input terminals simultaneously, for this may cause malfunction or damage.
Speaker level input terminals
•The
•Connect the power control lead to a power supply which can be turned ON/OFF by the ignition key switch (ACC line). With this connection, pop noise may be generated when the power of the
Genuine-accessory car
stereo
(No line output center unit
etc.)
Speaker level input cable
Car fuse box
Battery
ACC
combined impedance is 2Ω or greater for each channel.
•Bridged Connections:
Make connections to the LEFT channel 9 and the RIGHT channel · SPEAKER OUTPUT terminals. The speakers to be connected should have an impedance of 4Ω or greater. When multiple speakers are to be connected, ensure that the combined impedance is 4Ω or greater.
Power control terminal
Controls the unit ON/OFF.
NOTE
Controls the unit power. Be sure to connect it with all the systems.
Speaker output terminals (A.ch/ B.ch)
•Stereo Connections:
The speakers to be connected should have an impedance of 2Ω or greater. When multiple speakers are to be connected, ensure that the
6English