■Power and Speakers cable connection
•If a buzzing noise is heard from the speakers when the engine is running, connect a line noise filter (optional) to each of the battery cable.
•Do not allow the cord to directly contact the edge of the iron plate by using Grommets.
Power control | Front left | |
speaker | ||
(REMOTE) lead | Front right | |
terminal | ||
speaker | ||
|
ALeft output
(Front left) | A Right output |
| (Front right) |
FUSE(30A) | POWER IN | SPEAKER OUTPUT | BRIDGED | RIGHT | ||
| GND | LEFT | ||||
| BRIDGED |
| A |
|
| |
BATT | P.CON(REMOTE) | A |
|
|
|
|
|
| B |
| B |
|
|
|
| L | R |
|
| |
SPEAKER LEVEL INPUT
LEFTRIGHT
A |
B |
SPEAKER LEVEL INPUT
A
B
L R
|
|
| B Right output | |
| Terminal cover |
| (Rear right) | |
|
| Rear right | ||
Battery cable (Yellow) |
| |||
| speaker | |||
Fire wall | Round terminal | B Left output | Rear left | |
speaker | ||||
| ||||
Grommets | (Large) | (Rear left) |
| |
Battery
+-
Ground cable (Black)
Power control cable
2WARNING
To prevent fire caused by a short in the wiring, connect a fusible link or breaker nearby the battery’s positive terminal.
NOTE
Connect the ground cable to a metal part of the car chassis that acts as an electrical ground passing electricity to the battery‘s negative - terminal. Do not turn the power on if the ground cable is not connected.
Power terminal
Pass battery and ground cables through supplied terminal cover and connect to respective terminals. After completing connections, fasten terminal cover over terminal bracket.
Round terminal (Medium)
Round terminal (Small)
(Bridged)
2CAUTION
If you wish to
Connecting a speaker with an 
impedance lower than 4 ohms may damage the unit.
examples:
L |
| L |
|
R | ≥4Ω | R | ≥8Ω ≥8Ω |
|
|
| POWER IN | SPEAKER OUTPUT | BRIDGED | RIGHT | ||
| GND | LEFT | ||||
| BRIDGED |
| A |
|
| |
BATT | P.CON(REMOTE) | A |
|
|
|
|
|
| B |
| B |
|
|
|
| L | R |
|
| |
A Bridged
SPEAKER LEVEL INPUT
LEFTRIGHT
A
SPEAKER LEVEL INPUT
A
B 
B
L R
B Bridged
7
