■Multi Amplifier with Remote cable connection (Optional accessory)

You can control the Bass boost level of the

 

 

second and subsequent Slave amplifiers

 

 

simultaneously from the Master amplifier.

 

RCA cable*

The volume level of each amplifier is determined

CENTER UNIT

 

by the setting of the Master amplifier (INPUT

(CD receiver, etc.)

 

SENSITIVITY, boost level of the remote controller).

 

 

 

 

Setting the Master amplifier

1.Adjust the INPUT SENSIVITY to the output of the center unit to be connected.

2.Set the LPF frequency and ISF.

3.Turn the LINE OUT FILTER switch ON.

Setting the Slave amplifier

1.Turn the LINE OUT FILTER switch OFF.

2.Adjust the INPUT SENSIVITY.

•To adjust the Slave amplifier to the same volume as the Master amplifier, adjust the INPUT SENSIVITY to 0.2 V (max.).

2CAUTION

•Before connecting the remote controller cables, always turn the Bass boost level knob all the way to the left.

Power control wire

40

Master amplifier

Extension wire*

Remote cable

Remote controller

RCA cable*

* Commercially available parts

40

Slave amplifier

40

Slave amplifier

English 5