Controls / Indicator
(W)
40
20 10
1 | 2 3 | 4 | 5 |
1EXPANDER switch
When this switch is turned ON the dynamic range is increased.
2LPF (Low-Pass Filter) FREQUENCY control
This control adjusts the frequency band output from this unit.
3INFRASONIC switch
Ultralow frequencies that cannot be reproduced even by a subwoofer speaker do not become sound but become unnecessary oscillations, which affect the sound by causing distortion, etc. Setting this switch to "15 Hz" or "25 Hz" cuts the frequencies below the respective frequency. This improves the reproduction performance
of the speakers by eliminating unnecessary oscillations which will not become sound.
4BASS BOOST switch
Sets the boost level for bass control.
•12dB position:
BASS BOOST is +12 dB.
•OFF position:
BASS BOOST is OFF.
5INPUT SENSITIVITY control
Set this control according to the
Use the diagram on the right as a guide.
NOTE
For the