Kenwood KAF-1030, KAF-3030R Operation of remote control unit (KAF-3030Ronly), Loading batteries, Operation procedure, (approx.), Operating range, Model: RC-A0301, Infrared ray system

Operation of remote control unit (KAF-3030R only)

KAF-3030R/1030 (En)

Loading batteries 11

1Remove the cover.

2Insert batteries.

3Close the cover.

Operation procedure

Pressing the POWER key on the remote control when the standby indicator is lit turns ON the power. After the power comes ON, press the key you want to operate.

................................................................................................................

•Insert two AA-size (R6/SUM-3) batteries as indicated by the po- larity marking.

................................................................................................................

Remote sensor

6 m

30° 30°

		• When two operation keys on the remote control unit are pressed
Operating range	Model: RC-A0301	successively, press each key securely reserving an interval of
(approx.)	Infrared ray system	more than 1 second for each press.

1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.

2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.

Notes	3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light
	sensor. In such a case, change the system installation position to prevent the malfunction.