The system control connections (KAF-3030R only)

SYSTEM CONTROL CONNECTIONS

Connecting system control cords after connecting a KENWOOD audio component system lets you take advantage of convenient system control operations.

This unit is compatible only with the [SL16] mode. The system control operation is not available if the unit is connected in the [XS-8] connection mode.

NoteAdv. DA / CD inputs:For SYSTEM CONTROL connection of a CD player.MD / CD-R inputs:For SYSTEM CONTROL connection of an MD player.

KAF-3030R/1030 (En)

7

•Do this operation after completing all connections. (Ensure that the power plug is not connected.)

1.[SL16] equipment cannot be combined with [XR], [XS], and [XS8] equipment for system operations. If your equipment consists of this kind of combination, please

Notes

do not connect any system control cords, Even without system control cords,

 

 

normal operations can be carried out without affecting performance.

2.

If your amp or receiver does not have a system control terminal, do not connect

 

any system control cords to the system control terminals on the other compo-

 

nents.

3.

Do not connect system control cords to any components other than those speci-

 

fied by KENWOOD. It may cause a malfunction and damage your equipment.

4.

Be sure the system control plugs are inserted all the way in to the system control

 

terminals.

The system control operations

Remote Control

The remote control supplied with this unit can also be used to control the other components in the system.

Automatic Operation (except [XR] and [XS-8] equipment)

When you start playback from a source component, the input selector on this unit switches to that component automatically.

Synchronized Recording (except [XR] and [XS-8] equipment)

Lets you synchronize recording with the start of playback when recording from CD or MD.